VIO DCO-S Super ACO with Signal Quality Monitoring

VIO DCO-S is a super HD/SD-SDI signal automatic changeover, configured with signal quality monitoring, it can auto switch Mast signal between Slave signal not only based signal lost, but also based on the setting of alarm threshold value.

VIO DCO-S supports three signal input, Master, Slave and AUX signal. If the PGM is Master signal, when Master is abnormal and the Slave is good, the machine will switch from Master to Slave, but if the Slave signal is also abnormal, it’ll directly switch to the AUX signal. If the PGM is Slave signal, when Slave is abnormal and the Master is good, the machine will switch from Slave to Master, but if the Master signal is also abnormal, it’ll directly switch to the AUX signal.

The front panel is configured with a high definition menu LCD, color button indicates working status and permit manual operate. VIO DCO-S supplies serial port, GPI and Ethernet control interface. With embedded Web server, user can view the working status, open or close quality monitoring. If open, it supports: black, freeze, audio mute, freeze and mute joint detecting, user can set the probe threshold value and continuous time. It supports SNMP and can works with the third part monitoring software so that users can have real-time monitoring. Configured with dual power supply, it is really a cost-effect solution for system robust and safety.

Product

 

Key Features

 

◆ Self-adaptive to embedded SD/HD-SDI input/output of different formats

◆ Auto monitor channel quality and loss, including video black, freeze, audio mute, video freeze and audio mute joint, EDH, Line number, CRC

◆ Auto or manual seamless switching among Master, Slave and AUX signals.

◆ Audio alarm or not

◆ Built-in frame synchronization, support H phase adjustment

◆ Supports Master signal by-pass when power off

◆ Support GPI, RS232 and NET control with embedded webserver

◆ Support SNMP

◆ RCP is optional, one RCP can control master and slave two units host machine